Items where Subject is "T Technology & Engineering > TJ Mechanical engineering and machinery"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Number of items at this level: 51.

Article

Akhyar, Ibrahim and Sayuti, M (2015) Effect of Heat Treatment on Hardness and Microstructures of AISI 1045. Advanced Materials Research, 1119. 575 -579. ISSN 1022-6680

Dabet, Abubakar and Homma, Hiroki and Homma, Hiroomi and Gunawan, Edi Fergianto (2018) Effectiveness of Pre-Screening Test for Safe Design of Components Fabricated with Abaca Natural Fibers. International Journal of Mechanical Engineering, 9 (13). pp. 1207-1215. ISSN 0976 - 6359

Dabet, Abubakar and Homma, Hiroomi and Homma, Hiroki and Suardi, Suardi (2018) Statistical approach to tensile strength of abaca single fiber. Mechanical Engineering Journal, 5 (5). pp. 1-9. ISSN 2187-9745

Dabet, Abubakar and Indra, Indra and Hafli, Teuku (2018) Aplikasi teknik manufaktur vacuum assested resin infusion (VARI) untuk peningkatan sifat mekanik komposit plastik berpenguat serat Abaca (AFRP). Jurnal Polimesin, 16 (1). pp. 19-24. ISSN 2549-1199

Nayan, A. and Kam, T. Y. (2018) A modified simple shear deformation theory for vibration analysis of composite stiffened plate. International Journal of Mechanical and Production Engineering, 6 (10). pp. 70-74.

Setiawan, Adi (2010) Analisa Kekuatan Sambungan Las SMAW Menggunakan Kawat Las AWS E 7016 Dalam Menerima Beban Dinamis Dengan Metode SHPB. Proceedings the 5th Regional Seminar on Materials, Energy, and Structure. ISSN 978-979-98897-4-4

Setiawan, Adi (2010) Optimasi Proses Pembakaran dan Perpindahan Panas pada Alat Produksi Garam Hemat Energi. Proceedings The 5th Regional Seminar on Materials, Energy, and Structure (MAESTRUCT 2010). ISSN 978-979-98897-4-4

Setiawan, Adi and Friggieri, Jarrod and Bryant, Glenn and Kennedy, Eric and Dlugogorski, Bogdan and Stockenhuber, Michael (2015) Accelerated hydrothermal ageing of Pd/Al2O3 for catalytic combustion of ventilation air methane. Catalysis Science & Technology, 5 (8). pp. 4008-4016. ISSN 2044-4753

Setiawan, Adi and Friggieri, Jarrod and Hosseiniamoli, Hadi and Kennedy, Eric and Dlugogorski, Bogdan and Adesina, Adesoji and Stockenhuber, Michael (2016) Towards understanding the improved stability of palladium supported on TS-1 for catalytic combustion. Physical Chemistry Chemical Physics, 18 (15). pp. 10528-10537. ISSN 1463-9076

Setiawan, Adi and Friggieri, Jarrod and Kennedy, Eric and Dlugogorski, Bogdan and Stockenhuber, Michael (2014) Catalytic combustion of ventilation air methane (VAM) – long term catalyst stability in the presence of water vapour and mine dust. Catalysis Science & Technology, 4 (6). pp. 1793-1802. ISSN 2044-4753

Setiawan, Adi and Kennedy, Eric and Dlugogorski, Bogdan and Adesina, Adesoji and Stockenhuber, Michael (2015) The stability of Co3O4, Fe2O3, Au/Co3O4 and Au/Fe2O3 catalysts in the catalytic combustion of lean methane mixtures in the presence of water. Catalysis Today, 258 (2). pp. 276-283. ISSN 0920-5861

Setiawan, Adi and Kennedy, Eric and Dlugogorski, Bogdan and Adesina, Adesoji and Tkachenko, Olga and Stockenhuber, Michael (2014) Evidence of the formation of surface palladium carbide during the catalytic combustion of lean methane/air mixtures. Energy Technology, 2 (3). pp. 243-249. ISSN 2194 – 4288

Setiawan, Adi and Kennedy, Eric and Stockenhuber, Michael (2016) A review on the development of combustion technology for methane emitted from coal mine ventilation air systems (VAM). Energy Technology. ISSN 2194 – 4288 (In Press)

Yusuf, Muhammad and Arifin, M.K.A and Ismail, Ismail and Sulaiman, Sulaiman (2011) Influence of Cutting Parameters on Surface Roughness for Wet and Dry Turning Process. Key Engineering Materials, 471. pp. 233-238. ISSN 1662-9795

Yusuf, Muhammad and Arifin, M.K.A and Sulaiman, S and Ismail, N. (2013) Chip Formation and Surface Roughness in Dry Machining of Aluminium Alloys. Advanced Science Letters, 19 (8). pp. 2343-2346. ISSN 1936-6612

Yusuf, Muhammad and Arifin, M.K.A and Sulaiman, S and Ismail, N. (2014) Effect of Machining Process on Surface Microhardness of Titanium Carbide Reinforced Aluminium LM6 Composite. Applied Mechanics and Materials, 564. pp. 495-500. ISSN 16627482

Yusuf, Muhammad and Arifin, M.K.A and Sulaiman, S and Ismail, N. (2014) Experimental Investigation on Surface Roughness and Tool Wear in Dry Machining of TiC Reinforced Aluminium LM6 Composite. Materials Science Forum, 773-77. pp. 339-347. ISSN 02555476

Yusuf, Muhammad and Arifin, M.K.A and Sulaiman, S and Ismail, N. (2012) Optimization of Cutting Parameters on Turning Process Based on Surface Roughness using Response Surface Methodology. Applied Mechanics and Materials, 117. pp. 1561-1565. ISSN 1662-7482

Yusuf, Muhammad and Arifin, M.K.A and Sulaiman, S and Ismail, N. (2014) Surface Quality and Chip Formation in Turning of LM6 Aluminium Alloy and Particulate Reinforced Metal Matrix Composite. Materials Science Forum, 773-77. pp. 894-901. ISSN 02555476

zulmiardi, zulmiardi (2015) Analisa Kekuatan Tarik Serat Tunggal Pelepah Lontar Dengan 10% NaOH. Malikussaleh Journal of Mechanical Science and Technology, 3 (1). pp. 1-4. ISSN 2337-6945

Monograph

Dabet, Abubakar (2017) Analisis scatter kekuatan tarik komposit plastik berpenguat serat pisang Abaca(AFRP). Project Report. Lembaga Penelitian dan Pengabdian pada Masyarakat, Universitas Malikussaleh Press, Lhokseumawe, Indonesia. (Unpublished)

Conference or Workshop Item

Kam, T. Y. and Nayan, A. (2014) Vibro-acoustic analysis of orthotropic sound radiating plate using a simple firstorder shear deformation theory. In: 31th National Conference on Mechanical Engineering of CSME, December 6th and 7th 2014, Feng Chia University in TaiChung County, Taiwan.

Setiawan, Adi (2010) POTENSI TANDAN KOSONG SAWIT SEBAGAI BAHAN BAKU PEMBANGKIT LISTRIK YANG RAMAH LINGKUNGAN. In: The 5th Regional Seminar on Material, Energy and Structure (MAESTRUCT 2010), 6th February, 2010, Medan, Indonesia.

Suardi, Suardi and Homma, Hiromi and Abubakar, Abubakar (2018) Identification of tensile strength properties of abaca fiber by weakest linkage approach statistic property of fiber diameter. In: 10th International Conference Numerical Analysis in Engineering, 22 December 2017, Banda Aceh, Indonesia.

Yusuf, Muhammad (2011) Development of Tool Database Management System for Laboratory. In: Aceh Development International Conference, 23-26 March 2011, Universiti Kebangsaan Malaysia.

Yusuf, Muhammad (2013) Optimisation of Machining Parameters using Design of Experiment. In: Seminar Nasional Teknik Industri [SNTI] (Lhokseumawe 28-29 Agustus 2013), 28-29 Agustus 2013, Lhokseumawe, Aceh Indonesia.

Yusuf, Muhammad (2016) Rancang Bangun Dapur Peleburan Logam Non Ferro Berbahan Bakar Gas Sebagai Sarana Pembelajaran Di Laboratorium Teknik Manufaktur. In: Seminar Nasional Sains dan Teknologi (SEMNASTEK) 2016, 8 - 9 Nopember 2016, Universitas Muhammadiyah Jakarta.

Book

Bakar, Abu (2014) Bahan Ajar Mekatronika. Unimal Press, Lhokseumawe.

Fithra, Herman (2018) MODEL TRANSPORTASI BARANG. Unimal Press, Lhokseumawe. ISBN 978–602–464-039-2

Muhammad, Muhammad and Putra, Reza (2014) Bahan Ajar Bahan Teknik. Unimal Press, Lhokseumawe.

Sayuti, M and Reza, Putra (2022) Pengantar Pengolahan Logam. Sefa Bumi Persada, Lhokseumawe. ISBN 978-602-0768-95-3

Thesis

Setiawan, Adi (2015) Catalytic Combustion of Ventilation Air Methane Released from Coal Mines. Doctoral thesis, University of Newcastle.

Other

Dabet, Abubakar (2019) Hasil cek similarity Laporan penelitian Analisis scatter kekuatan tarik komposit plastik berpenguat serat pisang Abaca (AFRP). Repository unimal.ac.id, Universitas Malikussaleh. (Unpublished)

Dabet, Abubakar (2019) Hasil cek similarity artikel jurnal internasional Effectiveness of pre-screening test to safe design of component fabricated from abaca natural fiber. Universitas Malikussaleh, Repository unimal.ac.id. (Unpublished)

Dabet, Abubakar (2019) Hasil cek similarity artikel jurnal internasional Statistical approach to tensile strength of abaca single fiber. Universitas Malikussaleh, Repository unimal.ac.id. (Unpublished)

Dabet, Abubakar (2019) Hasil cek similarity artikel jurnal nasional Aplikasi teknik manufaktur vecuum assested resin infusion (VARI) untuk peningkatan sifat mekanik komposit plastik berpenguat serat Abaca (AFRP). Repository unimal.ac.id, Universitas Malikussaleh. (Unpublished)

Dabet, Abubakar (2019) Hasil cek similarity proseding seminar internasional Identification of tensile strength properties of abaca fiber by weakest linkage approach statistic property of fiber diameter. Universitas Malikussaleh, Repository unimal.ac.id. (Unpublished)

Dabet, Abubakar (2018) Peer reviewer artikel Aplikasi teknik manufaktur vacuum assested resin infusion (VARI) untuk peningkatan sifat mekanik komposit plastik berpenguat serat Ab. Repository unimal.ac.id, Universitas Malikussaleh. (Unpublished)

Dabet, Abubakar (2019) Peer reviewer artikel Effectiveness of pre-screening test to safe design of component fabricated from abaca natural fiber. Repository unimal.ac.id, Universitas Malikussaleh. (Unpublished)

Dabet, Abubakar (2019) Peer reviewer artikel statistical approach to tensile strength of abaca single fiber. Repository unimal.ac.id, Universitas Malikussaleh. (Unpublished)

Dabet, Abubakar (2019) Peer reviewer laporan hasil penelitian Analisis scatter kekuatan tarik komposit plastik berpenguat serat pisang Abaca. Repository unimal.ac.id, Universitas Malikussaleh. (Unpublished)

Dabet, Abubakar (2019) Peer reviewer proseding seminar internasional Identification of tensile strength properties of abaca fiber by weakest linkage approach statistic property of fiber diameter. Repository unimal.ac.id, Universitas Malikussaleh. (Unpublished)

Pustaka, Unimal (2016) Daftar Skripsi Mahasiswa Prodi Teknik Mesin 2010-2015. UPT. Perpustakaan UNIMAL, Lhokseumawe.

Yusuf, Muhammad (2014) HASIL PENILAIAN SEJAWAT SEBIDANG ATAU PEER REVIEW KARYA ILMIAH: JURNAL ILMIAH “Chip Formation and Surface Roughness in Dry Machining of Aluminium Alloys”. Universitas Malikussaleh. (Unpublished)

Yusuf, Muhammad (2014) HASIL PENILAIAN SEJAWAT SEBIDANG ATAU PEER REVIEW KARYA ILMIAH: JURNAL ILMIAH “Effect of Machining Process on Surface Microhardness of Titanium Carbide Reinforced Aluminium LM6 Composite”. Universitas Malikussaleh. (Unpublished)

Yusuf, Muhammad (2014) HASIL PENILAIAN SEJAWAT SEBIDANG ATAU PEER REVIEW KARYA ILMIAH: JURNAL ILMIAH “Experimental Investigation on Surface Roughness and Tool Wear in Dry Machining of TiC Reinforced Aluminium LM6 Composite”. Universitas Malikussaleh. (Unpublished)

Yusuf, Muhammad (2014) HASIL PENILAIAN SEJAWAT SEBIDANG ATAU PEER REVIEW KARYA ILMIAH: JURNAL ILMIAH “Influence of Cutting Parameters on Surface Roughness for Wet and Dry Turning Process”. Universitas Malikussaleh. (Unpublished)

Yusuf, Muhammad (2014) HASIL PENILAIAN SEJAWAT SEBIDANG ATAU PEER REVIEW KARYA ILMIAH: JURNAL ILMIAH “Optimization of Cutting Parameters on Turning Process Based on Surface Roughness using Response Surface Methodology”. Universitas Malikussaleh. (Unpublished)

Yusuf, Muhammad (2014) HASIL PENILAIAN SEJAWAT SEBIDANG ATAU PEER REVIEW KARYA ILMIAH: JURNAL ILMIAH “Surface Quality and Chip Formation in Turning of LM6 Aluminium Alloy and Particulate Reinforced Metal Matrix Composite”. Universitas Malikussaleh. (Unpublished)

Yusuf, Muhammad (2014) HASIL PENILAIAN SEJAWAT SEBIDANG ATAU PEER REVIEW KARYA ILMIAH: PROSIDING ILMIAH “Development of Tool Database Management System for Laboratory”. Universitas Malikussaleh. (Unpublished)

Yusuf, Muhammad (2014) HASIL PENILAIAN SEJAWAT SEBIDANG ATAU PEER REVIEW KARYA ILMIAH: PROSIDING ILMIAH “Optimisation of Machining Parameters using Design of Experiment”. Universitas Malikussaleh. (Unpublished)

This list was generated on Wed Dec 2 04:03:27 2020 WIB.