 | Up a level |
Yusuf, Muhammad and Arifin, M.K.A and Sulaiman, S and Ismail, N. (2014) Effect of Machining Process on Surface Microhardness of Titanium Carbide Reinforced Aluminium LM6 Composite. Applied Mechanics and Materials, 564. pp. 495-500. ISSN 16627482
Yusuf, Muhammad and Arifin, M.K.A and Sulaiman, S and Ismail, N. (2014) Experimental Investigation on Surface Roughness and Tool Wear in Dry Machining of TiC Reinforced Aluminium LM6 Composite. Materials Science Forum, 773-77. pp. 339-347. ISSN 02555476
Yusuf, Muhammad and Arifin, M.K.A and Sulaiman, S and Ismail, N. (2014) Surface Quality and Chip Formation in Turning of LM6 Aluminium Alloy and Particulate Reinforced Metal Matrix Composite. Materials Science Forum, 773-77. pp. 894-901. ISSN 02555476
Sayuti, M and Sulaiman, S and Baharudin, B.T.H.T and Arifin, M.K.A (2013) The Influence of Mechanical Mold Vibration on Temperature Distribution and Physical Properties of Al-11.8%Si Matrix Composites. Materials Science Forum, 773. pp. 195-202. ISSN 1662-9752
Yusuf, Muhammad and Arifin, M.K.A and Sulaiman, S and Ismail, N. (2013) Chip Formation and Surface Roughness in Dry Machining of Aluminium Alloys. Advanced Science Letters, 19 (8). pp. 2343-2346. ISSN 1936-6612
Sayuti, M and Sulaiman, S and Vijayaram, TR and Baharudin, B.T.H.T and Arifin, M.K.A (2012) Manufacturing of TiC Particulate Reinforced Al–11.8%Si Matrix Composites by Mechanical Vibration Mould. Advanced Science Letters,, 15 (1). pp. 12-15. ISSN 1936-7317
Abdullah, Azhar and Sulaiman, S and Baharudin, B.T.H.T and Arifin, M.K.A and Vijayaram, TR and Sayuti, M (2012) Testing for Green Compression Strength and Permeability Properties on the Tailing Sand Samples Gathered from Ex Tin Mines in Perak State,Malaysia. Advanced Materials Research, 445. pp. 859-864. ISSN 1662-8985
Yusuf, Muhammad and Arifin, M.K.A and Sulaiman, S and Ismail, N. (2012) Optimization of Cutting Parameters on Turning Process Based on Surface Roughness using Response Surface Methodology. Applied Mechanics and Materials, 117. pp. 1561-1565. ISSN 1662-7482
Sayuti, M and Sulaiman, S and Vijayaram, TR and Baharudin, B.T.H.T and Arifin, M.K.A (2011) The Influence of Mechanical Vibration Moulding Process on Thermal Conductivity and Diffusivity of Al-TiC Particulate Reinforced Composites. Advanced Materials Research, 311. pp. 3-8. ISSN 1662-8985
Sayuti, M and Sulaiman, S and Baharudin, B.T.H.T and Arifin, M.K.A and Vijayaram, TR and Sulaiman, Suraya (2011) Influence of Mechanical Vibration Moulding Process on the Tensile Properties of TiC Reinforced LM6 Alloy Composite Castings. Applied Mechanics and Materials, 66. pp. 1207-1212. ISSN 1662-7482
Sayuti, M and Sulaiman, Suraya and Sulaiman, Shamsuddin and Vijayaram, TR and Arifin, M.K.A and Baharudin, B.T.H.T (2011) Thermal Investigation of Aluminium – 11.8% Silicon (LM6) Reinforced SiO2 - Particles. Advanced Materials Research, 264. pp. 620-625. ISSN 1662-8985
Suraya, S and Sulaiman, S and Arifin, M.K.A and Sayuti, M (2011) Computer Simulation and Experimental Investigation of Solidification Casting Process. Key Engineering Materials, 471. pp. 601-605. ISSN 1662-9795
Sayuti, M and Sulaiman, S and Baharudin, B.T.H.T and Arifin, M.K.A and Vijayaram, TR and Sulaiman, Suraya (2011) Effect of Quartz-Silicon Dioxide Particulate on Tensile Properties of Aluminium Alloy Cast Composites. Key Engineering Materials, 471. pp. 727-732. ISSN 1662-9795
Sayuti, M and Sulaiman, S and Baharudin, B.T.H.T and Arifin, M.K.A and Sulaiman, S and Esmaeilian, G (2011) Mechanical Vibration Technique for Enhancing Mechanical Properties of Particulate Reinforced Aluminium Alloy Matrix Composite. Key Engineering Materials, 471. pp. 721-726. ISSN 1662-9795
Yusuf, Muhammad and Arifin, M.K.A and Ismail, Ismail and Sulaiman, Sulaiman (2011) Influence of Cutting Parameters on Surface Roughness for Wet and Dry Turning Process. Key Engineering Materials, 471. pp. 233-238. ISSN 1662-9795
Sayuti, M and Sulaiman, S and Baharudin, B.T.H.T and Arifin, M.K.A (2016) Metal Matrix Composite Products by Vibration Casting Method. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Amerika, pp. 1-29. ISBN 978-0-12-803581-8
Sayuti, M and Sulaiman, S and Vijayaram, TR and Baharudin, B.T.H.T and Arifin, M.K.A (2012) Manufacturing and Properties of Quartz (SiO2) Particulate Reinforced Al-11.8%Si Matrix Composites. In: Composites and Their Properties. InTech, Croatia, pp. 411-436. ISBN 978-953-51-0711-8
Sayuti, M and Sulaiman, S and Baharudin, B.T.H.T and Arifin, M.K.A and Sulaiman, Suraya and Vijayaram, TR (2011) Mechanical Properties of Particulate Reinforced Aluminium Alloy Matrix Composite. In: INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES (AMPT2010), 24–27 October 2010, Paris.
Sayuti, M and Sulaiman, S and Vijayaram, TR and Baharudin, B.T.H.T and Arifin, M.K.A and Suraya, S (2010) Manufacturing And Mechanical Properties Of Titanium Carbide Particulate Reinforced Aluminium-11.8% Silicon Alloy Matrix Composite Castings. In: World Engineering Congress 2010, Malaysia Conference on Advanced Processes and Materials, 2nd – 5th August 2010, Serawak, Malaysia.
Sayuti, M and Suraya, S and Sulaiman, S and Vijayaram, TR and Baharudin, B.T.H.T and Arifin, M.K.A (2010) Tensile Properties and Interfacial Bounding Strength of TiC Reinforced Aluminium Alloy. In: 3rd Engineering Conference (EnCon2010) on Advancement in Mechanical and Manufacturing for Sustainable Environment, April 14-16, 2010, Kuching, Serawak, Malaysia.
Suraya, S and Sayuti, M and Sulaiman, S and Arifin, M.K.A (2010) Tensile Properties of Titanium Carbide Particulates Composites. In: 3rd Engineering Conference (EnCon2010) on Advancement in Mechanical and Manufacturing for Sustainable Environment, 14-16 December 2009, Kuching, Serawak, Malaysia.
Sayuti, M and Sulaiman, S and Baharudin, B.T.H.T and Arifin, M.K.A (2010) PROCESSING AND CHARACTERISATION OF PARTICULATE REINFORCED ALUMINIUM -11.8 % SILICON MATRIX COMPOSITE. In: Aceh Development International Conference 2010 (ADIC 2010), 26-28 Maret 2010, Auditorium Hall, Faculty of Engineering, Universiti Putra Malaysia, Malaysia.
Sulaiman, Suraya and Sulaiman, S and Md.Fadzullah, S.H. Sheikh and Sayuti, M and Arifin, M.K.A (2009) Mechanical Anisotropy Behavior of Fused Deposition Modelling Abs. In: The 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 December 2009, Residence Hotel, Uniten, Putrajaya Kuala Lumpur Malaysia.
